Filter By:
- Lubes/Cleaners (141)
- Tools (580)
- Workstands (35)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Tools/Maintenance
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$13.00
Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.
$16.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2007-2010 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$272.00
- 11 speed compatible
- Allows removal, installation and peening of rivets
$19.00
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime
$19.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m10 includes:
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 124g
Warranty: Lifetime
$33.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime
$42.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- 8-12 speed chain tool is incorporated into the case
- Spoke wrench : #0, 1, 2 & 3
- Magnetized storage case can be used as a handle for extra leverage
$20.00
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel.
- Rubberized ergonomic handle
- Unique "thumb flange" makes it easy to apply pressure to the tire bead
- Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims
- Lifetime warranty
$17.60
Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs
$33.00
- The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets.
- The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore.
- The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm sizes and include a tool roll for organized shop use and travel.
$33.00
- Installation wrench for all Enduro TorqTite Bottom Brackets
- Some TorqTite installations require two wrenches
$90.00
- This tool allows you to swap out the chain rings on Cannondale cranks by removing the spider.
$209.00
- Tool for pulling and pressing bottom bracket bearings.
- For all BB30 frames and bearings
- Allows the bearing to be pulled without damage for cleaning and re-greasing
- Also safely presses bearings back into cups
- Instructions included
$209.00
- Installation and removal tool for press fit BB86 and BB92 bottom brackets
$7.99
- For removal (and installation) of chain link pins
- Compatible with 7, 8, 9 and 10-speed chains
$8.99
- Compatible with most 5-to-12 speed chains
- Go/no-go gauge indicates 0.75% wear
- Reverse side also functions as a chain hook
$14.99
- For removal (and installation) of chain link pins
- Compatible with 7, 8, 9, 10 and 11-speed chains
- Comfortable rubber coated handle improves grip
$14.99
- 3" multitool is compact for easy carry while the 2" tool length provides the leverage you need
- Ergonomic rubber coated non-slip side plates for increased grip
- 2, 2.5, 3, 4, 5, 6 and 8mm hex, T25, Phillips, Flat
$19.99
- All the brushes you need to detail your bike like a pro
- Large, ergonomic handles feature an EasyGrip inlay
- Tapered brush with soft bristles gets in all the tight, hard-to-reach spots
- DuoBrush combines sponges and soft bristles—great for frames and tires
- Gear cleaning brush with 3 brush heads makes quick work of drivetrain cleaning
$19.99
- For removal of cassette-type rear wheel gears
- Must be used with compatible cassette lockring tool
- Comfortable rubber coated handle improves grip
- Fits up to 9sp cassette
$19.99
- Lightweight and convenient tubeless plug kit
- Includes two tools—a tire reamer and a tire fork perfect for mountain bike tires.
- Integrated alloy case includes 10 plugs
$29.99
- Works with all multi-speed bikes (including 12-speed) as well as some single-speed models and e-bikes
- Cleans chain without the need to remove the chain
- 3 brush heads power away dirt and grime
- Absorbent sponge soaks up the degreaser as the chain exits the scrubber
- Heavy duty plastic construction ensures years of performance
- Sturdy handle and one-piece lid clamp make this chain scrubber easy to use
$149.99
- Clamp height adjusts from 41.75"- 56.75" (106 to 144 cm) to allow you to work at a comfortable level
- Clamp head rotates 360°
- The articulating jaw on the clamp provides a large clamp opening, allowing the bike to be easily inserted and removed by flipping the cam lever.
- Clamp head is micro-adjustable to accommodate various tube sizes.
- No tools required for quick setup and storage
- Lightweight aluminum construction
- Product Weight: 13.6 lbs (6.18 kg)
- Max load capacity: 77 lbs (35 kg)
$15.00
High performance suspension fluid formulated to provide fade-free performance.
Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.
$30.00
10 Weight Green Damper Fluid
For rebuild and repair of Fox suspension.
- 10 weight, 32oz bottle
Page 1 of 26
Next page